Check baby’s temperature with the Tommee Tippee FlexiPen digital thermometer – highly accurate temperature readings in just 8 seconds.

If baby’s temperature is too high and records a reading of 37.6C or above, a red light will flash and an alarm will sound to warn of a possible fever, helping to eliminate any doubt.

The digital thermometer stores the last reading allowing you to monitor baby’s temperature over time with ease. Supplied with a practical cover so you can keep the oral and underarm thermometer clean and hygienic between uses. The practical automatic shut-off feature helps to prolong battery life.

Instructions for use:

• Please make sure the environment temperature is between 16C – 31C before use.
• Press power switch to turn the unit on.
• It will beep when you turn it on to indicate sufficient power and you will see full segment screen for a few seconds
• After the full segment screen, you will see the last measured value with Last Memory on the display.
• After a few more seconds the screen will display LoC or LoF. Then the C or F symbol will flash. Please wait for the symbol to flash 3 times before taking a measurement.
• The thermometer will beep when its finished taking a reading:

• During measurement LCD will display LoC or LoF if the measured temperature is below 32C / 90F or will display HiC or HiF if the measured temperature is above 43.9C / 111F
• Turn off the unit by lightly pressing the power switch or leave it for a few minutes and it will auto-off to save power.
• To maintain the accuracy of each measurement, please wait for at least 3 minutes before taking another measurement.

How to toggle between C and F:

Press switch to turn on and hold it down until the display shows LoC (with no flash), release the switch and within 2 seconds press it again. You do this to change from C to F or back.